Exterior Designing Services for Bunk House

Product Details:

• The chassis made from a rigid steel frame with floor welded to ISMC of structurally required section & between sections from a box steel rectangular pipe.

• The cage structure and wall panels are constructed in MS framework of ISMC,& Rectangular pipes.
• Total wall thickness: 55mm to 80 mm
• Exterior walls: 18 Swg Galvanized sheet
• CO2 MIG welded to the frame
• Inner wall is covered with decorative both side laminated 8mm-particle board.
• Lightweight Rockwool insulation is filled in between the exterior and interior cavity wall.
• The exterior wall is painted with anticorrosive rich epoxy zinc primer & fully satin paint as outer wall finish.

• The roof is both side slope type made of GI 18 gauge galvanized sheet fixed on prefabricated trusses
• Sandwich type of steel frame
• Inner roof wall is with decorative both side laminated 8mm-particle board.
• Lightweight insulation is filled in between the exterior and interior cavity wall.
• The exterior roof wall is painted with anticorrosive rich epoxy zinc primer & fully satin paint as outer wall finish.

• All voids within the external wall and inner walls are filled with 50 mm thick resin-bonded mineral rock wool of 2’x 4’ slab.
• Reduction in heat transmission: up to 64%
• 100% inorganic asbestos free
• Non-toxic and non-flammable
• Non-hygroscopic & vermin proof
• Expanded polystyrene slab: 50mm thick
• Lower thermal conductivity, excellent shock absorption, better mechanical strength, & high resistance to moisture.

• Main door is constructed of rigid steel frame.
• Exterior is equal to exterior 18 SWG GI sheet & internally fitted with 8 mm thick both side laminated with heavy hinged & bolts handle gripes and suitable locking arrangement.